How to Turn on a Delta Shower Head
If you’re like many people, you’ve run into an issue turning on your Delta showerhead. This is not an uncommon problem. However, it’s a simple solution with some insight. So, how to turn on a delta showerhead? You pull down on the diverter located at the bottom of the faucet, where the water comes out. Please keep reading to learn more about this process and the faucet itself.
How to turn on Delta Shower Head Types
If you’re having trouble turning on a delta showerhead, you’re not alone. Many people all over find themselves scratching their heads trying to figure out this common problem. However, you’ve come to the right place to get answers. It is a simple problem with an even simpler solution.
If you’re having trouble turning on a delta showerhead, you’re not alone. Many people all over find themselves scratching their heads trying to figure out this common problem. However, you’ve come to the right place to get answers. This is a simple problem with an even simpler solution.
When you’re ready to take your shower, you’ll select the appropriate temperature for your needs by adjusting the knobs on the faucet. It may be a single-handle faucet or a double faucet. Once the desired temperature is achieved, all you need to do to get the shower engaged is pull down on the diverter.
Remember the Diverter
Once the correct temperature is achieved, all you need to do to get the shower engaged is pull down on the diverter. So, you may ask what the diverter is and where it is located.
A diverter is just as its name implies. It diverts water from the faucet to the showerhead. The diverter is generally located at the bottom of the faucet opening where the water comes out. The diverter is usually around a ring or a knob that you can pull either up or down, and then the shower will spray water.
Just turn off the water or push the diverter back up to stop the water flow from the shower. Most models of Delta faucets have a similar operating mechanism, which means you should easily be able to figure out how it works once you know this information.
How Do I Use The Ring Style Shower Head System?
The newer diverter ring-style faucets are the model that gives people the most trouble. This model is streamlined and has no obvious diverter like the older models. You’ll likely see a simple single-handle mechanism for the hot and cold water. To use these types, you need to take one of two approaches.
Try turning the water temperature up or down by turning the handle right or left. The hot water usually comes on by Turing the handle counterclockwise-more cold water if you turn it clockwise. Then you can pull the diverter ring down at the bottom of the faucet where the water comes out.
If you have a different type, you should pull the hot and cold levers out and up and then pull the diverter ring down towards the tub. The water to the showerhead will only engage once you pull the tab up after selecting the temperature.
How Do I Turn on the Shower Head With an Older Model?
Older models may have a diverter stem at the top of the faucet. This model usually has the stem on top of the faucet. When you pull it up, it looks like a cylindrical or rounded knob with a long, thin stem. This model requires you to pull the stem up toward the shower to divert water flow from the faucet to the shower. It may take a few seconds for the water to begin flowing through the shower head, so be patient.
You may hear some bubbling or gurgling noises when the water goes through the pipes and into the shower head. This sound is typical. Finish fine-tuning the temperature and water pressure with the temperature knobs next to the faucet. Once you finish using the shower, push the stem back down. This process lets the water flow back through the faucet and prevents the shower from spraying the next person when they turn on the water.
How Do I Control a Jetted Model Shower Head?
If you’re using a jetted model, you’ll turn the handle on the wall between the two jets in an upward position. The water will then begin to come out of the shower heads. Turning the handle in either direction allows you to operate the water jets and get the correct temperature and water.
Once you’re finished showering, you’ll need to return the handle to its previous position. If there are temperature selectors, return them to their position before the shower is engaged.
Summary
Delta shower heads are notorious for giving people issues if they are unfamiliar with how they work. Many models are in use today, and some have a unique mechanism to allow the user to toggle between the faucet and the shower. Before you use the shower, take a moment to assess the components.
Determine if you’re working with an older stem diverter or if you have a ring or jet knob present. Follow the directions posted previously, and if you have any issues, gently pull and push the knobs and levels until you figure out the correct mechanism for that mode. A word of caution, however.
Be sure you never force a know or handle in any direction. Forcing the handle won’t make the shower work, but it will break the o-rings and seals inside of the faucet and break the plumbing components. If that occurs, you won’t be able to shower and repairs must be made for the shower to work properly. If you find yourself at the hotel, you can always call the front desk for help, or if you stay at an Air B n’ B, ask the homeowner or maintenance company if you can’t figure it out. You can also log on to the Delta website for troubleshooting tips for various models.
You can also read:
